Martelune
Fenomastic Emulsion Primer - interior surfaces
Fenomastic Emulsion Primer - interior surfaces
Couldn't load pickup availability
This is a high performance emulsion primer, designed for interior purposes.
Based on alkali resistant acrylic emulsion.
Features And Benefits
Excellent penetration into the substrate there by providing the best adhesion. Offers best protection against alkali attack.
Has very low VOC which ensures good indoor air quality.
Offers good flow, hiding power and in-can anti bacterial properties.
Free from harmful chemicals like APEO, formaldehyde, heavy metals etc.
Ideal for priming interior surfaces
Substrate
Cement plaster, concrete, block work, gypsum board etc. Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting. The compatibility of any third party filling material, if used, shall be confirmed with Jotun before application.
Application data
The product can be applied by
Roller : Recommended.
Spray : Use airless spray or conventional spray.
Brush : Recommended to paint corners and edges.
Conditions During Application
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
Drying Times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.
| Recommended data given is, for recoating with the same generic type of paint. |
| In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied. |
| The surface should be dry and free from any contamination prior to application of the subsequent coat. |
Surface Preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc.
All traces of form release agents/curing agents must be removed.
A light sanding with suitable abrasive material is recommended before application.
Any resulting dust/loose particles must be removed.
If you require any further orders (color, type and etc.), feel comfortable to contact us.
