Martelune
Fenomastic My Home Rich Matt
Fenomastic My Home Rich Matt
Couldn't load pickup availability
This product is a superior quality emulsion paint, with enriched colour experience due to the accuracy of colours and its matt finish. Based on pure acrylic emulsion and designed for all interior surfaces.
Features and Benefits
Offers a wider selection of colours which come out more beautifully because of the matt finish.
Deep colours look rich, strong colours look soft as they are undistrurbed by gloss. It also has enhanced film properties.
Has very low VOC which ensures good indoor air quality. Offers good flow, hiding power, incan anti bacterial and colour retention properties. Free from harmful chemicals like APEO, formaldehyde, heavy Metals etc.
Specially formulated topcoat recommended for all indoor spaces, including residential areas, villas and hotels.
Substrate
Cement plaster, Concrete, block work, gypsum board and rendered surfaces. Substrate should have sufficient strength to receive the paint.
Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.
Application Data
The product can be applied by
Roller : Recommended.
Brush : Recommended to paint corners and edges.
Spray : Airless spray or Conventional spray.
Conditions During Application
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate.
Good ventilation is usually required in confined areas to ensure proper drying.
Drying Times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.
| Recommended data given is, for recoating with the same generic type of paint. |
| In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied. |
| The surface should be dry and free from any contamination prior to application of the subsequent coat. |
Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc.
All traces of form release agents/curing agents must be removed.
A light sanding with suitable abrasive material is recommended before application.
Any resulting dust/loose particles must be removed.
If you require any further orders (color, type and etc.), please feel comfortable to contact us.
