Martelune
Jotashield ColourXtreme Matt
Jotashield ColourXtreme Matt
Couldn't load pickup availability
This product is a superior quality, exterior, 100% pure acrylic water based topcoat
Features And Benefits
The unique heat reflective features and UV protected colours offer outstanding protection against heat from Infrared rays and destructive effect of UV rays present in Sunlight.
Specially designed to withstand the harsh middle east weather conditions and provides durable & long lasting matt finish with low dirt pick up.
It is a low-VOC product that contributes to reducing energy consumption in cooling the interiors of buildings.
Its unique formulation protects concrete from carbonation (Acts as anticarbonation coating).
Ideal for decorating and protecting exterior surfaces
Substrate
Cement plaster, concrete, block work, rendered surfaces etc.
Substrate should have sufficient strength to receive the paint.
Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.
Application Data
The product can be applied by
Roller : Recommended.
Spray : Use airless spray or conventional spray.
Brush : Recommended to paint corners and edges.
Attention:
Stir well before use. Handle with care!
Conditions During Application
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate.
Good ventilation is usually required in confined areas to ensure proper drying.
Drying Times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.
| Recommended data given is, for recoating with the same generic type of paint. |
| In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied. |
| The surface should be dry and free from any contamination prior to application of the subsequent coat. |
Surface Preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc.
All traces of form release agents/curing agents must be removed.
A light sanding with suitable abrasive material is recommended before application.
Any resulting dust/loose particles must be removed.
Primer
Acrylic Emulsion Primer or Jotashield Alkali Resistant Primer or Jotashield Penetrating Primer : 1 Coat
If you require any further orders (color, type and etc.), please feel comfortable to contact us.
