Skip to product information
1 of 1


Lady Design Stucco Antica

Lady Design Stucco Antica

Regular price Dhs. 240.00 AED
Regular price Sale price Dhs. 240.00 AED
Sale Sold out
Tax included.


A high quality waterborne product




Features And Benefits

Creates an elegant and antique finish. Comes in a beautiful selection of colours which will help you in creating the perfect look.



Cement plaster, Concrete, block work, gypsum board, rendered surfaces, MDF, plywood etc. Substrate should have sufficient strength to receive the paint.
Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.


Highly recommended that this product is applied by a skilled and a professional painter


Application Data 

Application equipment/methods
Apply onto small areas by using a spatula, smooth the material to obtain a truly level surfaces.
A gloss can be achieved by rubbing the product with a trowel when wet or dry.
Repeat the same process of application at least three to four times to obtain a very smooth, marble like appearance.
To increase the gloss further and to prevent water absorption and increase washability, one coat of special wax can be applied with cotton wool followed by polishing preferably seven days after application.
The product can be applied by Spatula, Trowel (Made of stainless steel).


Recommended Paint System

Fenomastic Emulsion Primer : 1 Coat

Fenomastic Pure Colours Emulsion Matt ( 40% Dilution ) : 2 Coats
Lady Design Stucco Antica : 4 Coats ( 2 Coats with Smooth finish and 2 Coats with desired design )



Drying Times

Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.

Recommended data given is, for recoating with the same generic type of paint.
In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
 The surface should be dry and free from any contamination prior to application of the subsequent coat.



Surface Preparation

The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc.
All traces of form release agents/curing agents must be removed.
A light sanding with suitable abrasive material is recommended before application.
Any resulting dust/loose particles must be removed.



If you require any further orders (color, type and etc.), please feel comfortable to contact us.








View full details